Gen Chem · Sem 1 · 1-2c
Chemical Nomenclature

Decoding the chemical language: from formula to name.

Sodium hydroxide. Copper(II) sulfate. Carbon monoxide. A chemical bottle's name is not an arbitrary label — it is a precise instruction manual for what atoms are inside and how they are bonded. In this lesson, you'll master the decision tree for naming both ionic and covalent compounds, balance charges with Roman numerals and polyatomic ions, and decode safety labels straight off our classroom chemical tray.

Alignment
HS-PS1-2 (Target PS1-2.2: Name ionic and covalent compounds from formulas, and write formulas from names).
Objective
Classify compounds as ionic or covalent, balance ion charges to determine formula units, apply Roman numerals for transition metals, and use Greek prefixes for covalent molecules.
Prerequisite
Required before drawing Lewis structures (1-3a). You cannot map a molecule's 2D structure if you cannot decode its formula!

Core Rules of Nomenclature

  • Step 1 — Check for a Metal: If a metal (or ammonium NH4+) is present, the compound is ionic. If only nonmetals are present, it is covalent.
  • Ionic Rules: Name the cation first, then the anion. No Greek prefixes! Charge balance fixes the ratio.
  • Transition Metals: Require Roman numerals in parentheses (e.g., Fe3+ is Iron(III)) to specify oxidation state.
  • Polyatomic Ions: Polyatomics stay intact as groups (e.g., SO42− is sulfate; use parentheses if multiple: Cu(NO3)2).
  • Covalent Rules: Use Greek prefixes (mono-, di-, tri-, tetra-) to report atom counts. End the second element in -ide. (Drop mono- on the first element).

Nomenclature Decision Flowchart

Metal Present? YES NO IONIC Charge Balance COVALENT Greek Prefixes
01

The Nomenclature Decision Tree

Before writing a name or formula, you must answer one fundamental question: Is there a metal present?

Chemical naming is split into two completely separate systems. Mixing them up is the most common error in chemistry! Greek prefixes like di- and tri- belong only to covalent compounds. Ionic compounds never use prefixes because their element ratio is mathematically fixed by electrical charge balance.

Branch A: Ionic Compounds

Condition: Contains a metal cation (or NH4+) + nonmetal anion (or polyatomic ion).

  • Rule: Cation name + Anion name (ending in -ide or polyatomic name).
  • No Prefixes: Never write "disodium monoxide". Na2O is simply sodium oxide because Na is +1 and O is −2; 2:1 is the only valid ratio.
  • Roman Numerals: Used if the metal is a transition metal with multiple charges (e.g. Fe2+ vs Fe3+).

Branch B: Covalent Compounds

Condition: Contains only nonmetals sharing valence electrons.

  • Rule: [Prefix]-FirstElement + [Prefix]-SecondElement-ide.
  • Use Prefixes: Carbon and oxygen can combine as CO (carbon monoxide) or CO2 (carbon dioxide). Prefixes tell us the exact molecular count!
  • Exception: Omit mono- on the first element (write carbon dioxide, not monocarbon dioxide).

Interactive Practice: Ionic or Covalent?

Classify each chemical formula into the correct nomenclature branch. Click a formula to assign it to Ionic or Covalent.

IONIC (Metal / NH₄⁺ Present)
COVALENT (Nonmetals Only)
Checkpoint 1 Decision Tree Verification

A student writes the name "dicalcium dichloride" for CaCl2. Explain why this name is incorrect, and state the proper name.

02

Ionic Compounds & Charge Balance

Ionic formulas represent neutral formula units where total positive charge equals total negative charge.

Because an ionic crystal lattice is electrically neutral overall, the ratio of cations to anions must balance to net charge zero. You can determine main-group ion charges directly from periodic table column positions:

Group 1 Group 2 Group 13 Group 15 Group 16 Group 17
+1 +2 +3 −3 −2 −1
Na+, K+ Mg2+, Ca2+ Al3+ N3−, P3− O2−, S2− F−, Cl−, Br−

Transition Metals & Roman Numerals

Transition metals (like iron, copper, cobalt) can form multiple stable ions with different positive charges (oxidation states). We specify the exact charge of the metal cation using a Roman numeral in parentheses immediately after the metal's name:

  • Fe2+ + 2 Cl− → FeCl2 : Iron(II) chloride
  • Fe3+ + 3 Cl− → FeCl3 : Iron(III) chloride
  • Cu+ + O2− → Cu2O : Copper(I) oxide
  • Cu2+ + O2− → CuO : Copper(II) oxide

Crucial Rule: The Roman numeral reports the cation's charge, NOT the subscript count in the formula!

Interactive Practice: Ionic Charge Balancer

Adjust the counts of cations and anions until the net charge reaches zero, then verify the resulting chemical formula and name.

Na⁺
1
+
Cl⁻
1
Total Charge: 0 (Balanced!)
NaCl
Sodium chloride
Checkpoint 2 Transition Metal & Charge Balance

Determine the chemical formula and systematic name for the ionic compound formed between Fe3+ ions and O2− ions.

03

Polyatomic Ions & Formula Writing

Polyatomic ions are covalently bonded atomic clusters that act as a single unit with a net charge.

Polyatomic ions travel together as unbreakable groups during ionic compound formation. When balancing charges, if you need more than one polyatomic ion in a formula unit, enclose the entire ion in parentheses before adding the subscript!

Common Cation (+1)
  • NH4+ : Ammonium
Common Anions (−1)
  • OH− : Hydroxide
  • NO3− : Nitrate
  • HCO3− : Bicarbonate
Common Anions (−2 / −3)
  • SO42− : Sulfate
  • CO32− : Carbonate
  • PO43− : Phosphate
Parentheses Example

Combine Ca2+ and NO3−:

To balance the +2 charge from Calcium, we need two Nitrate ions (−1 × 2 = −2). We write: Ca(NO3)2 — Calcium nitrate.

Writing CaNO32 would mean 32 oxygen atoms! Always use parentheses when multiplying a polyatomic ion.

Checkpoint 3 Polyatomic Formula Assembly

Write the correct chemical formula for Copper(II) sulfate (containing Cu2+ and SO42−) and Sodium hydroxide (containing Na+ and OH−).

04

Binary Covalent Naming

Using Greek prefixes to specify exact nonmetal atom counts in molecular formulas.

Covalent compounds form between nonmetals. Because nonmetals can combine in multiple discrete ratios (e.g. CO vs CO2, NO vs NO2 vs N2O4), charge balance does not apply. Instead, we use Greek prefixes to state the number of atoms of each element directly:

1 mono-
2 di-
3 tri-
4 tetra-
5 penta-
6 hexa-
7 hepta-
8 octa-
9 nona-
10 deca-

Three Rules for Covalent Prefixes

  1. First Element: Keep its element name. Add a prefix if there are 2 or more atoms (e.g. N2O4 → dinitrogen...). If there is only 1 atom, drop mono- (e.g. CO2 → carbon..., not monocarbon...).
  2. Second Element: Always attach a prefix (even mono-!) and change the ending to -ide (e.g. CO → carbon monoxide, N2O4 → dinitrogen tetroxide).
  3. Vowel Dropping: Avoid double vowels like mono-oxide or tetra-oxide; drop the 'a' or 'o' to write monoxide and tetroxide.
Checkpoint 4 Covalent Naming Verification

Name the covalent compound N2O5 and write the chemical formula for sulfur hexafluoride.

05

Storyline Bridge: Decoding GHS Chemical Labels

Connecting systematic chemical names to actual hazard safety profiles on our classroom chemical tray.

The Classroom Chemical Tray Connection

On Block 1.1, you observed real chemical bottles on our front bench. Now you can decode exactly what is inside those bottles from their names alone before opening any lid!

CORROSIVE Sodium Hydroxide (NaOH)

Ionic compound containing Na+ and polyatomic OH−. Dissolves in water to release corrosive hydroxide ions.

TOXIC GAS Carbon Monoxide (CO)

Covalent compound. Prefix mono- indicates 1 oxygen atom. Lethal odourless gas from incomplete combustion.

ENVIRONMENTAL Copper(II) Sulfate (CuSO₄)

Ionic compound. Roman numeral (II) reports Cu2+ charge balanced by SO42− polyatomic anion.

Gen Chem · HS-PS1-2 · constructed response[4 marks]

A stockroom bottle is labeled "Iron(III) oxide" and another is labeled "Sulfur trioxide". 1. Classify each compound as ionic or covalent and state your reasoning.
2. Write the correct chemical formula for both compounds.
3. Explain what the Roman numeral (III) in Iron(III) oxide and the prefix tri- in Sulfur trioxide tell you about their respective structures.

Mark scheme — 4 marks
  • Classifies correctly (1 mark): Iron(III) oxide is ionic (metal Fe + nonmetal O); Sulfur trioxide is covalent (nonmetals S + O only).
  • Formulas correct (1 mark): Iron(III) oxide = Fe2O3; Sulfur trioxide = SO3.
  • Explains Roman numeral (1 mark): Roman numeral (III) specifies the cation charge (Fe3+), which requires charge balancing with O2− to form a 2:3 ratio (Fe2O3).
  • Explains Greek prefix (1 mark): Prefix tri- directly states the molecular atom count (3 oxygen atoms covalently bonded to 1 sulfur atom in an SO3 molecule).

Self-score: 4 = all four points clearly explained · 3 = correct formulas but mixed up Roman numeral vs prefix explanation · 2 = correct formulas only · ≤1 = incomplete classification.

Why This Matters

In industry and emergency response, reading chemical names instantly tells responders whether a spilled substance will dissociate into ions in waterways (like copper sulfate) or evaporate as molecular toxic gases (like carbon monoxide), dictating immediate containment and safety protocols.